Denon ADV-700 Owners Manual - Page 11
Connecting the antenna terminals - back panel
View all Denon ADV-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
(4) Connecting the antenna terminals AM LOOP ANTENNA (Supplied) FM INDOOR ANTENNA (Supplied) ENGLISH DIRECTION OF BROADCASTING STATION 75 Ω/ohms COAXIAL CABLE FM ANTENNA AM OUTDOOR ANTENNA LOOP ANT. AM FM COAX. 75 R L IMPEDANCE 6 16 FRONT CENTER SPEAKER SYSTEMS R L SURR FM ANTENNA L ADAPTER (Supplied) R GROUND • An F-type FM antenna cable plug can be connected directly. • If the FM antenna cable's plug is not of the F-type, connect using the included antenna adapter. AM loop antenna assembly 1 2 Connect to the AM antenna terminals. 3 Remove the vinyl tie and take out the 4 connection line. a. With the antenna on top any stable surface. Bend in the reverse direction. Mount b. With the antenna attached to a wall. Installation hole Mount on wall, etc. Connection of AM antennas 1. Push the lever. 2. Insert the conductor. 3. Return the lever. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Notes: • Do not connect two FM antennas simultaneously. • Even if an external AM antenna is used, do not disconnect the AM loop antenna. • Make sure AM loop antenna lead terminals do not touch metal parts of the panel. FM antenna adopter assembly Open the cover PULL CLAMP PULL ANTENNA ADAPTER REMOVE CLAMP 75 Ω/ohms COAXIAL CABLE SHUT 14mm CLAMP 9mm SHUT 5mm CLAMP 3C-2V 5C-2V 19mm 14mm 5mm 5C-2V Y CB CR 11