Denon ADV-700 Owners Manual - Page 28
] Setting the speaker distance, Preparations, METERS, SET THE DISTANCE TO EACH SPEAKERS, DEFAULT - reset
View all Denon ADV-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
ENGLISH [2] Setting the speaker distance • Input the distances from the listening position to the speakers and set the surround delay time. • The default settings below are set upon shipment from the factory. Preparations: Measure the distances from the listening position to the speakers (L1 to L3 on the diagram at the right). FL Center FR - - Listening position - SL SR L1: Distance from center speaker to listening position L2: Distance from front speakers to listening position L3: Distance from surround speaker to listening position 1 To perform these operations from places other than the system setting change menu, see page 26. 2 At the SYSTEM SETUP MENU select "DELAY TIME". ENTER Remote control unit • Switch to the DELAY TIME screen. Remote control unit 4 Select the speaker to be set using the and cursor buttons, then setting the distance between the speakers and the listening position using the and cursor buttons. • Set the distance between the center speaker and listening position. The distance changes in units of 1 foot (0.1 meters) each time the button is pressed. Select the value closest to the measured distance. DELAY TIME B SET THE DISTANCE TO EACH SPEAKERS UNIT METERS FEET DEFAULT FRONT&SW 9 f t CENTER 8 f t SURROUND 7 f t DELAY TIME B SET THE DISTANCE TO EACH SPEAKERS UNIT METERS FEET DEFAULT FRONT&SW 9 f t CENTER 8 f t SURROUND 7 f t SELECT : FINISH: ENTER BUTTON • Use the and cursor buttons to select the distance unit, "METERS" or "FEET". Press the cursor button to proceed to the next step if you do not wish to change this. 3 When "YES" is selected for "DEFAULT", the delay times for the various speakers are set to the default values. B YES: FRONT & SW / 9ft CENTER / 8ft SURROUND / 7ft B NO: The current settings are used. SELECT : FINISH: ENTER BUTTON The difference of the distances set for the different speakers must be no greater than 10 ft (3.0 m). If an inapplicable distance is set, "CAUTION: INVALID DISTANCE" is displayed. Change the speaker position and reset. 5 Enter the setting. • The SYSTEM SETUP MENU reappears. ENTER Remote control unit 28