Denon ADV-700 Owners Manual - Page 68
Everyday timer, Setting the Everyday timer
View all Denon ADV-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
ENGLISH (2) Everyday timer Description of timer • The timer can be used to switch the power between the ON and STANDBY (OFF) modes once every day at the same time. (Everyday timer) • The timer can be used to play DVDs, CDs or TUNER. Before setting the timer • Set the current time. Be careful to set the right time. Checking the timer settings • Use the same procedure as when setting the timer to check the timer settings. q Press the TIMER/SET button for at least 2 seconds to set the timer setting mode. w Now press the TIMER/SET button again repeatedly to display the timer start function, the start time and end times. e After the end time (minutes) is displayed, the timer standby setting is displayed, and when the TIMER/SET button is pressed again the display returns to as it was before the timer was set. Changing the timer settings • Reset the timer using the new settings. • The previous settings are cleared when they are replaced with the new settings. Clearing the timer settings • With "Step 4 to 12" displayed, press the TIMER/SET button for at least 2 seconds. All the timer settings are cleared. • Press the TIMER/SET button again for a least 2 seconds, the display returns to as it was before the timer was set. Turning the timer off • Press the TIMER/SET button, and when "T.Stdby" is displayed, turn the FUNCTION/SELECT dial to select "OFF". (The display's mark turns off.) If there is a power failure • If there is a power failure or if the power cord has been unplugged, the clock display flashes once the power comes back on, the clock resumes counting, and if the timer was set the timer operates according to the clock. Be sure to correct the current time setting. (3) Setting the Everyday timer Example: To listen to a CD from 12:35 p.m. to 12:56 p.m. 4,6,8,10,12,14 c 8 1:02:46 1 DVD TONE 1,16 2,3,5,7,9,11,13,15 • Perform this operation after setting the current time (steps 1 to 7 on page 67). 1 Turn on the power • Load a CD into the main unit for the ON / STANDBY purpose of timer play. Green Main unit 2 Press the TIMER/SET button for at least 2 seconds. • If the time is set, "EVERYDAY" is displayed. EVERYDAY TIMER/SET Main unit ✽ "SET TIME" is displayed when the time setting has not been made. Perform operations 3 to 7 of Page 67, then perform the timer setting again 3 Press the TIMER/SET button. • "Timer FUNC" is displayed. Timer FUNC 4 Setting the timer start function. Set the function to "DVD". TIMER/SET Main unit FUNCTION /SELECT Timer DVD Main unit 5 Press the TIMER/SET button. • The timer setting mode is set and the timer start time setting can be made. On AM12:00 TIMER/SET Main unit 68