Denon ADV-700 Owners Manual - Page 83
TROUBLESHOOTING, Check again before assuming the player is malfunctioning - sale
View all Denon ADV-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
ENGLISH 23 TROUBLESHOOTING Check again before assuming the player is malfunctioning 2 Are all the connections correct ? 2 Are you following the instructions in the manual ? 2 Are the speakers and other components operating properly ? If this unit does not seem to be functioning properly, check the table below. If this does not solve the problem, this unit may be damaged. Turn off the power, unplug the power cord from the power outlet, and contact your store of purchase or nearest Denon sales office. Symptom Cause DISPLAY not lit and sound not produced • Power cord not plugged in securely. when power switch set to on. Measures • Check the insertion of the power cord plug. Page 8 DISPLAY lit but sound not produced. • Speaker cords not securely connected. • Connect securely. 14 • Improper position of the audio function • Set to a suitable position. 35 button. • Volume control set to minimum. • Turn volume up to suitable level. 36 • MUTING is on. • Switch off MUTING. 37 • Digital signals not input Digital input • Input digital signals or select input jacks to 36 selected. which digital signals are being input. Common problems when listening to the discs, tapes and FM broadcasts, etc. Monitor doesn't display an image. • Connections between the video output jack of this unit and the input connector of the monitor are incomplete. • The input setting of the monitor TV is different. • The video signals of the various devices are not uniform. • Check whether the connections are correct. 9, 10, 12 • Set the input switching of the TV to the jack to which the video input is connected. • Make settings uniform for either composite video or S-video connectors. - 10, 12 The program cannot be copied from DVD • Almost all movie software contains a copy • A copy cannot be made. - to the VCR. prevention signal. • Power is not being supplied to the • Switch on the power of the subwoofer. - subwoofer. The subwoofer does not produce sound. • The subwoofer setting is made to "No" in • Change the setting to "Subwoofer" in the the setup. setup. 26 • The output of the subwoofer has not been • Make the proper connections. 14 connected. Remote control unit The test tone is not output. • The surround mode is set to a mode other • Set to auto decode. than auto decode. 40 • Batteries dead. • Replace with new batteries. 18 • Remote control unit too far from this unit. • Move closer. 18 • Obstacle between this unit and remote • Remove obstacle. 18 control unit. This unit does not operate properly when • Different button is being pressed. • Press the proper button. 17 remote control unit is used. • < and > ends of battery inserted in reverse. • Insert batteries properly. 18 • The mode selection of the remote control is • Press the remote control mode selection 17 not properly selected. The DVD mode, AV button for the item you wish to operate. To mode, or audio mode is not properly operate this unit, use with the DVD mode. selected. 83