Denon AVR 3806 Owners Manual - Page 24

Connecting Other Sources Connecting a CD player To connect the digital audio output from the CD player, you can choose from either the coaxial or optical connections. If you choose to use the optical connection, it needs to be assigned. For more information about Digital Input Assignment ( page 63). Connecting Other Sources Connecting a CD recorder or MD recorder If you wish to perform analog dubbing from a digital source, such as a CD or MD recorder to an analog recorder such as a cassette deck, you will need to connect the analog inputs and outputs as shown below, in addition to the digital audio connections. CD player A AUDIO OUT L L L R R R D OPTICAL OUT C COAXIAL OUT Connecting a turntable You can connect the turntable (MM cartridge) to the PHONO terminals. Turntable (MTMurcnatratrbildege) CD recorder / MD recorder A AUDIO OUT L L L R R R A AUDIO IN L L L R R R D OPTICAL OUT D OPTICAL IN NOTE: • Do not connect the output of the component connected to the OPTICAL 4 OUT terminal on the AVR-3806's rear panel to any terminal other than the OPTICAL 4 IN terminal. A L AUDIO OUT R GND Connecting a tape deck NOTE: • The phono input can accept signals from moving magnet (MM) and high output moving coil (MC) phono cartridges. If your turntable is equipped with a low output MC cartridge, you will need to use a separate MC head amplifier or step-up MC transformer. • If humming or other noise is generated when the ground wire is connected, disconnect the ground wire. Tape deck A AUDIO OUT L L L R R R A AUDIO IN L L L R R R 19