Denon AVR 3806 Owners Manual - Page 69

Advanced Setup - Part 1 SW Level: Sets the playback level of the analog signal that was input to the EXT. IN subwoofer terminal. Select according to the specifications of the player being used. Also refer to the player's operating instructions. +15dB (default) recommended. (0, +5, +10 and +15 can be selected.) 3 Press the ENTER button to enter the setting. • The "Audio Input Setup" menu reappears. Setting the Function Rename The names of the input sources displayed on the front display and on the on screen display can be changed. The names or brands of the devices connected to the input sources can be input. 1 Press the CURSOR D or H button to select the "Function Rename" at the "Audio Input Setup" menu, then press the ENTER button. • The "Function Rename" screen appears. Advanced Setup - Part 1 4 Repeat step 3 to input the input source name. If you wish to set the input source back to as it was initially, press the CURSOR H button with the input source highlighted. If "Yes" is selected for "Default", the setting are automatically reset to the default name. Setting the Input Function Level • Correct the playback level of the different input sources. • Adjust the playback levels of the devices connected to the different input sources to the same level to eliminate the need for adjusting the main volume each time the input source is switched. 1 Press the CURSOR D or H button to select the "Input Function Lev." at the "Audio Input Setup" menu, then press the ENTER button. • The "Input Function Lev." screen appears. 2 Press the CURSOR D or H button to select the input source whose name you want to change, then press the CURSOR F or G button. • The screen switches to the character input screen. Example: When "DVD" is selected and the CURSOR F or G button is pressed 5 Once all the characters have been input, press the ENTER button. • The "Function Rename" screen reappears. Use the same procedure to change other input source names as well. 6 Press the ENTER button to enter the setting. • The "Audio Input Setup" menu reappears. 2 Press the CURSOR D or H button to select the input source, then press the CURSOR F or G button to adjust the level. The level can be adjusted between -12 dB and +12 dB in units of 1 dB. If "Yes" is selected for "Default", the settings are automatically reset to the default values. 3 Press the ENTER button to enter the setting. • The "Audio Input Setup" menu reappears. 3 Press the CURSOR F or G button to move the cursor ( 2 ) to the character, number, symbol or punctuation mark you wish to input, and press the CURSOR D or H button to select that character. ABCDEFGHIJKLMNOPQRSTUVWXYZ a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9 space) Up to 8 characters can be input. • When the input source is selected, the display is as shown below. Example: When the name has been changed to "DVD-5910" • After completing this setting, check that the playback levels for the different sources are the same. 64