Denon AVR 3806 Owners Manual - Page 86

Advanced Setup - Part 2 Check the parameter • The results of the measured items can be checked. • The EQ parameters that were set in Auto Setup can be checked. • This item is displayed, after the measurement result of the "Auto Setup / Room EQ" is decided. 4 Press the CURSOR D or H button to select the Equalizer curve, then press the ENTER button. • The "EQ Check" screen appears. 1 Press the CURSOR D or H button to select the "Parameter Check" at the "Auto Setup / Room EQ" menu, then press the ENTER button. • The "Parameter Check" screen appears. The display is only an approximate picture of the response and that correction is happening at all frequencies. Advanced Setup - Part 2 8 The results of the "Auto Setup" procedure can be reset even if the settings have been changed after performing the "Auto Setup" procedure: Press the CURSOR D or H button to select the "Restore Yes 0", then press the CURSOR F button. 2 Press the CURSOR D or H button to select the items, then press the ENTER button. • The verification screen appears. For instructions on checking the results of each item ( page 12, 13). 5 Press the CURSOR F or G button to select the speaker channel. 6 If the check ends, pressing the CURSOR D or H button to select the "Exit", then press the ENTER button. • The "EQ Parameter Check" screen reappears. 9 Press the CURSOR D or H button to select the "Exit", then press the ENTER button. • The "Auto Setup / Room EQ" menu reappears. 3 Press the CURSOR D or H button to select the "EQ Parameter Check", then press the ENTER button. • The "EQ Parameter Check" screen appears. 7 Press the CURSOR D or H button to select the "Exit", then press the ENTER button. • The "Parameter Check" screen reappears. 10 Press the CURSOR D or H button to select the "Exit", then press the ENTER button. • The "System Setup Menu" reappears. 81