Denon AVR 3806 Owners Manual - Page 73

Advanced Setup - Part 1 2 Press the CURSOR D or H button to select the setting, then press the CURSOR F or G button to select the parameter. Analog to HDMI Convert: • ON: Setting for converting analog video signals into HDMI signals. • OFF: Setting for not converting analog video signals into HDMI signals. Color Space: • Y Cb Cr: The Y Cb Cr format video signals is output via the HDMI output connector. • RGB: The RGB format video signals is output via the HDMI output connector. RGB Mode Setup: • Normal: Signals are output via the HDMI output connector with a digital RGB video range (data range) of 16 (black) to 235 (white). • Enhanced: Signals are output via the HDMI output connector with a digital RGB video range (data range) of 0 (black) to 255 (white). When the HDMI connectors are connected, the black may seem to stand out, depending on the TV or the monitor. In this case, set this to "Enhanced". When "Y Cb Cr" is selected under "Color Space", "RGB Mode Setup" will have no effect. 3 Press the ENTER button to enter the setting. • The "Video Setup" menu reappears. • "Color Space" and "RGB Mode Setup" are only displayed when "Analog to HDMI Convert" is set to "ON". • When connecting to an HDCP compatible monitor equipped with DVI-D terminal using an HDMI/DVI-D converter cable, the signals are output in RGB format, regardless of the "Color Space" setting. • To view the on-screen display using an HDMI monitor, set "Analog to HDMI Convert" at "HDMI Out Setup" to "ON" (default). Setting the Audio Delay • When watching a DVD or other video source, the picture on the monitor may seem delayed with respect to the sound. In this case, adjust the audio delay to delay the sound and synchronize it with the picture. • The audio delay setting is stored separately for each input source. 1 Press the CURSOR D or H button to select the "Audio Delay" at the "Video Setup" menu, then press the ENTER button. • The "Audio Delay" screen appears. 2 Press the CURSOR F or G button to set the delay time (0 ms ~ 200 ms). With a movie source, for example, adjust so that the movement of the actors' lips is synchronized with the sound. 3 Press the ENTER button to enter the setting. • The "Video Setup" menu reappears. • The audio delay setting does not apply when playing in the EXT. IN mode or in the analog input direct mode or stereo mode (Front speaker setting "Large" TONE DEFEAT "ON" and Room EQ "OFF"). • By default, this menu is not displayed when no digital signals are being input. Advanced Setup - Part 1 Setting the On Screen Display (OSD) • Use this to turn the on screen display (messages other than the menu screens) on or off. • Sets the on screen display's display mode. 1 Press the CURSOR D or H button to select the "On Screen Display" at the "Video Setup" menu, then press the ENTER button. • The "On Screen Display" screen appears. 2 Press the CURSOR D or H button to select the item to be set, then press the CURSOR F or G button to select the parameter. Function/Mode Status: Set whether or not to turn on the on screen display of the input source name and input mode when an input source is selected.signals. Master Volume Status: Set whether or not to turn on the on screen display of the main volume level when the main volume is operated. Display Mode: • Mode 1: Flickering is not prevented. • Mode 2: Prevents flickering of the on screen display when there is no video signal. Use this mode if the on screen display does not appear in the Mode 1, as may happen according to the TV being used. 68