Denon AVR 3806 Owners Manual - Page 76

Advanced Setup - Part 1 3 Press the CURSOR F or G button to select the speaker to be set. • The screen switches to the character input screen. Example: When "L/R CH" is selected. 5 Press the ENTER button to enter the setting. • The "Manual EQ" screen reappears. 6 Press the CURSOR D or H button to select the "Exit", then press the ENTER button. • The "Advanced Playback" menu reappears. Advanced Setup - Part 1 Procedure for copying the "Flat" correction curve 1 Press the CURSOR D button to select the "Base Curve Copy", then press the CURSOR F button. The display changes as follows. q Select the "L/R CH" FL/FR C SBL/SBR SL/SR A+B SLA/SRA SLB/SRB w Select the "Each CH" FL FR C SLA SRA SLB SBR SBL SR A+B SB 1spkr SL A+B SRB When the surround back speaker setting is set to "1spkr" at "Speaker Configuration", this is set to "SB". e Select the "All CH" In this case, speaker selection is not performed. If a value is already set for the FL channel, the data stored for the FL channel is displayed. 7 Press the CURSOR D or H button to select the "Exit", then press the ENTER button. • The "System Setup Menu" reappears. 2 Press the CURSOR F button to select the "Yes". 3 Press the ENTER button to enter the setting. • The "Manual EQ" screen reappears. • "Base Curve Copy" is displayed after performing the Auto Setup. • To restore the settings to their defaults, select "Default Yes 0", then press the CURSOR F button. 4 Press the CURSOR D or H button to select the frequency, then press the CURSOR F or G button to adjust the gain level. Each frequency can be adjusted the range from -20 dB to +6 dB in 0.5 dB step. The type of the copied correction curve is displayed in the upper right of this screen. • If the "Auto Setup" procedure has not been performed, this item is not displayed. 71