Denon AVR 3806 Owners Manual - Page 28
Connecting the XM terminal, Connecting the CONTROL terminal, Connecting the TRIGGER OUT terminals - receiver
UPC - 081757506786
View all Denon AVR 3806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Connecting Other Sources Connecting the XM terminal • AVR-3806 is the XM Ready® receiver. You can receive XM Satellite Radio® by connecting to the XM Connect-and-PlayTM (sold separately) and subscribing the XM service. • Plug the XM Connect-and-Play antenna into XM terminal on the rear panel. • Position the XM Connect-and-Play antenna near a south-facing window to receive the best signal. For details, see "XM Satellite Radio" ( page 45). When making connections, also refer to the operating instructions of the XM Connect-and-Play antenna. Connecting the CONTROL terminal XM Connect-and -Play Antenna XM Connecting Other Sources This terminal is used for an external controller. Perform the following operation before using an external controller connected to the RS-232C terminal: 1. Press the ON/STANDBY switch on the main unit and set the unit to the operating mode. 2. Perform the operation to turn off the power from the external control. 3. Check that the product has been set to the standby mode. After checking the above, check the connections of the external controller. Operation is possible. NOTE: • Keep the power supply cord unplugged until the XM Connect-and-Play antenna connection have been completed. Connecting the TRIGGER OUT terminals Turn the DC 12V voltage on and off for the individual functions and surround modes. For details, see "Setting the Trigger Out" ( page 73). 23