Denon AVR 3806 Owners Manual - Page 85
Cursor, Enter, Room Eq
UPC - 081757506786
View all Denon AVR 3806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Advanced Setup - Part 2 Others Setup Setting the Room EQ Setup Select the setting of an Equalizer that has been set with Auto Setup or Manual EQ. 1 Press the CURSOR D or H button to select the "Room EQ Setup" at the "Auto Setup / Room EQ" menu, then press the ENTER button. • The "Room EQ Setup" screen appears. Front: Adjusts the frequency response of the surround speakers to match the characteristics of the front channel speakers. Flat: Adjusts the frequency response of all speakers to the flattest response. This mode is suitable for multi-channel music surround sound sources. Manual: Selects the setting value that was set in the Manual EQ Setup. For details of the "Manual EQ Setup" ( page 70, 71). Advanced Setup - Part 2 Setting the Direct Mode Setup Perform the ON/OFF setting of Room EQ when the surround mode is "DIRECT" or "PURE DIRECT". 1 Press the CURSOR D or H button to select the "Room EQ Setup" at the "Auto Setup / Room EQ" menu, then press the ENTER button. • The "Direct mode Setup" screen appears. 2 Press the CURSOR F or G button to select the "All" or "Assign". All: Sets the Equalizer for all surround modes. Assign: Sets the Equalizer individually for each surround mode. 3 When "All" is selected: q Press the ENTER button. -1 • The "Room EQ" screen appears. w Press the CURSOR F or G button to select the equalizer setting. 3 When "Assign" is selected: After completing system setup, select the desired -2 equalizer setting pressing the ROOM EQ button. • Equalizer settings for the individual surround modes can be stored in the memory. Whenever the ROOM EQ button is pressed, the display switches as shown below. OFF Audyssey Front Manual Flat 4 Press the ENTER button to enter the setting. • The "Auto Setup / Room EQ" menu reappears. 2 Press the CURSOR F or G button to select the "ON" or "OFF". 3 Press the ENTER button to enter the setting. • The "Auto Setup / Room EQ" menu reappears. Setting the MIC Input Select Sets whether the setup microphone is connected to the PIN JACK (V.AUX L channel) connector or the MINI JACK (SETUP MIC) connector. • The Equalizer setting of "Audyssey", "Front" and "Flat" can be selected after performing the Auto Setup. • When the speaker set as "None" with the Auto Setup is changed to on manually, the equalizer of "Audyssey", "Front" and "Flat" cannot be used. • The Equalizer setting can be selected directly by ROOM EQ button. • When headphones are connected, the Room EQ cannot be used. 1 Press the CURSOR D or H button to select the "Mic Input Select" at the "Auto Setup / Room EQ" menu, then press the ENTER button. • The "Mic Input Select" screen appears. OFF: The Equalizer is not used. Audyssey: Adjusts the frequency response of all speakers to correct the effects of room acoustics. 2 Press the CURSOR F or G button to select the "Mic" or "V.AUX L". 80 3 Press the ENTER button to enter the setting. • The "Auto Setup / Room EQ" menu reappears.