Denon AVR 3806 Owners Manual - Page 84
for the different channels
UPC - 081757506786
View all Denon AVR 3806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Advanced Setup - Part 2 • If "LFE+Main" is set at "Subwoofer Setup", "SW:LFE+Main" ( page 76) is displayed at the top right of the screen. 3 Press the CURSOR F or G button to select the frequency. Advanced Setup - Part 2 2 Press the CURSOR D or H button to select the surround mode, then press the CURSOR F or G button to select the surround speaker. • We recommend using with the crossover frequency set to "80Hz", but depending on the speaker, setting it to a different frequency may improve frequency response near the crossover frequency. • The crossover frequency mode is valid only when subwoofer is set to ON, and when one or more speakers are set to SMALL, as described in section "Speaker Configuration" settings ( page 75). Setting the crossover frequency individually for the different channels 4 Press the ENTER button to enter the setting. • The "Speaker Setup" menu reappears. • If "LFE" is selected at "Subwoofer Setup", the frequencies can only be selected for speakers set to "Small" at "Speaker Configuration". A: When surround speakers A is used. B: When surround speakers B is used. A + B: When both surround speakers A and B are used. 3 Press the ENTER button to enter the setting. • The "Speaker Setup" menu reappears. 4 Press the CURSOR D or H button to select the "Exit", then press the ENTER button. • The "System Setup Menu" reappears. 1 Press the CURSOR F or G button to select the "Advanced" at the "Crossover Frequency" screen. • If "LFE+Main" is set at "Subwoofer Setup", the frequencies can be selected regardless of the speaker size setting. 2 Press the CURSOR D or H button to select the speaker to be set. Selecting the Surround Speakers for the different surround modes • This menu is displayed when both surround speakers A and B are used. • At this screen preset the surround speakers to be used in each surround modes. 1 Press the CURSOR D or H button to select the "Surround Sp Setup" at the "Speaker Setup" menu, then press the ENTER button. • The "Surround Sp Setup" screen appears. • For the "WIDE SCREEN" and "7CH STEREO" DSP simulation modes, the surround speakers can be set separately. 2 About Speaker type setting when using both surround speakers A and B • If "Small" is set for either surround speakers A or B, the output is the same as when "Small" is set for both A and B. 79