Denon AVR 3806 Owners Manual - Page 78

Advanced Setup - Part 1 Mute Level: Set the volume attenuation level when the mute mode is set for the different zones. • FULL The volume is fully muted. • -40 dB The volume is lowered 40 dB from the current level. • -20 dB The volume is lowered 20 dB from the current level. Volume Level: Set whether to fix the output level for the different zones or make it variable. • Variable The level can be adjusted freely using buttons on the remote control unit. • -40 dB, 0 dB The output level is fixed at the set level and the volume can no longer be adjusted. 3 Press the ENTER button to enter the setting. • The "Option Setup" menu reappears. • The volume control for ZONE3 can be set only when "ZONE3" is selected at "Power Amp Assign" ( page 72). Setting the Trigger Out • Two 12 V DC Trigger Outputs on the rear panel can be used to control other devices with compatible trigger inputs, such as motorized screens, motorized screen masking, motorized drapes, and other trigger-controlled devices. • Set the DC output supplied from the trigger out terminals for the various input sources to "ON" or "OFF". 1 Press the CURSOR D or H button to select the "Trigger Out" at the "Option Setup" menu, then press the ENTER button. • The "Trigger Out" screen appears. 2 Press the CURSOR D or H button to select the trigger out terminal you want to set, then press the ENTER button. • The setting screen appears. Example: When "Trigger Out 1" is selected Advanced Setup - Part 1 ON: When that input source is selected, the power supplied from the trigger out terminal turns on. OFF: When that input source is selected, the power supplied from the trigger out terminal turns off. 5 If "MAIN" was selected at step 3: Press the CURSOR D or H button to select the surround mode, then press the CURSOR F or G button to select the "ON" or "OFF". ON: If "ON" is selected when an input source set to "ON" is selected, the power supplied from the trigger out terminal turns on. OFF: If "OFF" is selected when an input source set to "ON" is selected, the power supplied from the trigger out terminal turns off. • For ZONE2 and ZONE3, the "Volume Limit" and "Power On Level" can be set when "Variable" is selected for "Volume Level". • When the power amplifier is assigned to either of the ZONE2 and ZONE3 channels at "Power Amp Assign", "-VAR-" (only variable) is displayed and the fixed level cannot be set. 3 Press the CURSOR F or G button to select the zone (MAIN ZONE, ZONE2 and ZONE3). The power supplied from the trigger out terminal turns on and off when the power for the set zone is turned on and off. 6 Press the ENTER button. • The "Trigger Out" screen reappears. Use the same procedure to make the settings for Trigger Out 2. 4 Press the CURSOR D or H button to select the input source, then press the CURSOR F or G button to select the "ON" or "OFF". 73