Denon AVR 3806 Owners Manual - Page 47

Basic Operation 4 Press the CURSOR G button to select the "Tone Defeat OFF". Channel level You can adjust the channel level either according to the playback sources or to suit your tastes, as described below. 1 Press the ENTER button. • The "Channel Vol." screen is displayed. Basic Operation Fader function This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together. Use it for example to adjust the balance of the sound from each position when multi-channel music sources are played. 1 Press the ENTER button. • The "Channel Vol." screen is displayed. 5 Press the CURSOR D or H button to select the "Bass" or "Treble". 2 Press the CURSOR D, H or ENTER button, then select "Fader". 6 Press the CURSOR F or G button to set the level. To increase the bass or treble: The bass or treble sound can be increased up to +6 dB in steps of 1 dB. To decrease the bass or treble: The bass or treble sound can be decreased down to -6 dB in steps of 1 dB. Channels which is not used are not displayed. 2 Press the CURSOR D, H or ENTER button to select the speaker. The channel switches as shown below each time the ENTER button is pressed. FL C FR SW SR 7 Press the ENTER button. • The surround parameter menu screen reappears. 8 Press the ENTER or SURROUND PARAMETER button to complete the setting. 2 Tone defeat mode If you do not want the bass and treble to be adjusted, turn on the tone defeat mode. FADER SL SBL SBR 3 Press the CURSOR F or G button to adjust the level. The adjustment range for the different channels is +12 dB to -12 dB in step of 0.5 dB. The sound from the subwoofer can be completely cut by lowering the SW (subwoofer) setting one additional from -12 dB (setting it to "OFF"). The channel switches in the order shown below each time the ENTER button is pressed. FL C FR SW SR FADER SL SBL SBR 3 Press the CURSOR F button to reduce the volume of the front channels, the CURSOR G button to reduce the volume of the rear channels. Example: When "FRONT" is selected Press the TONE DEFEAT button to turn on the "Tone Defeat" mode. The signals do not pass through the bass and treble adjustment circuits, providing higher quality sound. • When the surround back speaker setting is set to "1spkr" for "Speaker Configuration" ( page 75), this is set to "SB". The fader function does not affect the subwoofer channel • The channel whose channel level is adjusted lowest can be faded to -12 dB using the fader function. • If the channel levels are adjusted separately after adjusting the fader, the fader adjustment values are cleared, so adjust the fader again. 42