Denon AVR 3806 Owners Manual - Page 42

Basic Operation SURROUND STANDARD ENTER PARAMETER CURSOR USER MODE STANDARD CURSOR SURROUND PARAMETER USER MODE ENTER 6 Press the CURSOR F or G button to adjust the parameters setting. DEFAULT setting: Press the CURSOR F button to select "Default Yes 0", then parameters set to default setting. 7 Press the ENTER or SURROUND PARAMETER button to complete the setting. • There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3 STEREO). The AVR-3806 sets the mode automatically according to the types of speakers set during the system setup process ( page 75). 2 Surround parameters w Basic Operation Pro LogicIIx and Pro LogicII Mode: Select one of the modes ("Cinema", "Music", "Pro Logic" or "Game"). The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround. The Music mode is recommended for stereo music and surround-encoded stereo music sources. The Pro Logic mode emulates Dolby Laboratories' original Dolby Pro Logic surround decoding, and may provide better results with older, legacy surround-encoded program material. The Game mode is optimized for computer and/or dedicated game box consoles, that feature stereo analog or digital outputs. It can only be used with 2-channel stereo sources. PANORAMA: This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging. Select "OFF" or "ON". DIMENSION: This control gradually adjust the soundfield either towards the front or towards the rear. The control can be set in 7 steps from 0 to 6. CENTER WIDTH: This control adjust the center image so it may be heard only from the center speaker; only from the left/right speakers as a phantom image; or from all three front speakers to varying degrees. The control can be set in 8 steps from 0 to 7. 37