Denon AVR 3806 Owners Manual - Page 51

Basic Operation Channel selection 1 Set the input source to "TUNER". 2 Press the TUNER button on the remote control unit to select the TUNER mode. 3 WSaettcthhine gintphuetdsiosuprlacye,tpor"eTssUtNheEBRA".ND button to select the XM mode. Channel number XM040 DeepTrks Channel name Artist name/Song title 4 Press the TUNING • or ª button to reach the desired channel. The channel changes continuously when you press and hold the TUNING button. When the artist name and song title are received, they are displayed. Category search 1 Press the F or G button in the XM mode. • The current category name is displayed. Direct access of channels 1 Press the SEARCH button in the XM mode. 2 Press the NUMBER buttons to enter the desired channel. For example, if you want to access channel 123 (ex.XM123) press the Number buttons as shown below. XM001 DIRECT SEARCH XM012 DIRECT SEARCH (Remote control unit) XM123 DIRECT SEARCH 3 Once all number have been input, press the ENTER button to change the channel. If the next NUMBER button is not pressed within several seconds, the channel automatically switches to the channel number that was input. Basic Operation • "LOADING" is displayed while receiving the channel or information. XM040 DeepTrks LOADING • "UPDATING" is displayed while updating encryption code. XM040 DeepTrks UPDATING • When the selected channel is not available, "XM- - -" is displayed. XM--- • Information on the artist name, song title, category and signal level can be checked using the STATUS button on the main unit. • The XM Satellite Radio channels can be preset in the same way as AM/FM band. Please refer to "Preset memory" and "Recalling preset stations" ( page 44). XM040 DeepTrks CATEGORY SEARCH XM040 CAT: DeepTrks Rock Channel Category 2 Press the CURSOR F or G button to select the category, and press the CURSOR D or H button to select the channel within the selected category. 46