Epson 890N Service Manual - Page 29
IEEE1284.4 protocol, 3.5. Default Setting.
![]() |
UPC - 010343850019
View all Epson 890N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
EPSON FX-890/2190 1.2.7 IEEE1284.4 protocol The packet protocol described by IEEE1284.4 is supported on the parallel I/F. Two function modes of IEEE1284.4 protocol, "Off" and "Auto", are available and one of them is selected according to the value of Default setting. (See Section 1.3.5. Default Setting). NOTE:Packet protocol option "Off" &"Auto" in Default setting mode are effective in not only parallel I/F but also USB I/F. Auto: Communication is carried out in the convetional mode until a magic string (1284.4 synchronous commands) is received. By receiving a magic string, communication in IEEE1284.4 packet mode is started. Off: Communication is carried out in the convetional mode. NOTE:The packet protocol of IEEE1284.4 allows a device to carry on multiple exchanges or conversations which contain data and/or control information with another device at the same time across a single point-to-point link. The protocol is not, however, a device control language. It does provide basic transport-level flow control and multiplexing services. The multiplexed logical channels are independent of each other and blocking of one has no effect on the others. The protocol operates over IEEE1284. Revision B PRODUCT DESCRIPTIONS Interface 29
![](/manual_guide/products/epson-890n-service-manual-6defdea/29.png)