Epson 890N Service Manual - Page 79
Platen
UPC - 010343850019
View all Epson 890N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
EPSON FX-890/2190 4.3.3 Platen 1. Perform Pre-Disassembly. (p.70) 2. Remove the 2 CBS (M3x8) screws securing the COVER,PLATEN. (See Figure 4-14) 3. Rotating the teeth of the Bushing, 8, Right and Bushing 8 Left forward, disengage them from the Left/Right Side Frame. 4. Move the carriage to the right end, lift the left side of the platen slightly, move the carriage to the center and remove the platen to the left. (See Figure 4-15) C A U T IO N Take care not to cut your finger on the metallic frame or on the PAPER GUIDE ASSY., SUPPORT. When installing the COVER, PLATEN, make sure that the hook on the right side of the COVER, PLATEN is engaged with the gear shaft on the right side of the Printer Mechanism Assy properly. COVER, PLATEN Bushing, 8, Left Revision B CBS Screws (3x8) x2 Tightening Torque: 0.9±0.1N.m COVER, PLATEN Bushing, 8, Right Figure 4-14. Platen Removal 1 A D JU S TM E N T R E Q U IR E D After installing the Platen, make the following adjustment: • Platen Gap Adjustment (p.95) Figure 4-15. Platen Removal 2 Disassembly and Assembly Printer Mechanism Disassembly 79