Epson 890N Service Manual - Page 92
Ribbon Drive (RD) Assembly, Ribbon Drive Assembly Removal 1
UPC - 010343850019
View all Epson 890N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
EPSON FX-890/2190 4.3.14 Ribbon Drive (RD) Assembly 1. Remove the Printer Mechanism. (p.80) 2. Remove the Platen. (p.79) 3. Remove the hexagon nut and the washer securing the LEVER,G,ADJUST to the SHAFT,CR,GUIDE, and remove the lever. (See Figure 4-26) 4. Remove the BUSHING,PARALLEL,ADJUST to turn the SHAFT,CR,GUIDE. (See Figure 4-26) 5. Remove the harness for PG Detector. (See page 86) 6. Remove the harness for HP Detector from the LEFT FRAME. (See page 78) 7. Remove the CBS (M3x8) screw securing the Holder Pulley Driven to the LEFT FRAME, and remove the Holder Pulley Driven. (See Figure 4-28) 8. Remove the 3 CBS (M3x8) screws securing the LEFT FRAME in the Printer Mechanism, and remove the LEFT FRAME. (See Figure 4-28) 9. Release the tension spring. (See Figure 4-17) 10. Remove the CBS C (P2) (M3x8) screw and the CBP (M3x8) screw securing the Ribbon Drive Assembly. (See Figure 4-31) 11. Release the Ribbon Drive Assembly engaging with the ROLLER ASSEMBLY,DRIVE, and remove the Ribbon Drive Assembly. A D JU S TM E N T R E Q U IR E D After installing the Ribbon Drive Assembly, make the following adjustments: • Bi-d Adjustment (p.101) • Platen Gap Adjustment (p.95) When installing the Ribbon Drive Assembly, perform lubrication according to "Lubrication" (p.100) in Chapter 6. Revision B CBS C(P2) Screw (3x8) Tightening Torque: 0.9±0.1N.m Ribbon Drive Assembly FRAME, FRONT ROLLER ASSEMBLY, DRIVE CBP Screw (3x8) Tightening Torque: 0.9±0.1N.m Disassembly and Assembly Figure 4-31. Ribbon Drive Assembly Removal 1 Printer Mechanism Disassembly 92