Epson 890N Service Manual - Page 35

EPSON FX-890/2190 1.3.6 EEPROM Clear Function You can return some parameters into the factory settings to perform panel operation easily. Pressing Load/Eject & LF/FF & Pause switches at the same time while turning on the printer returns the default settings into the factory settings: Table 1-39. Cleared Items and Values on EEPROM (Standard Model) Item Value Character table selection PC437 Page length for rear tractor 11 inch Page length for front tractor 11 inch Page length for CSF bin 1 22 inch Page length for CSF bin 2 22 inch TOF adjustment value for rear tractor 8.5 mm TOF adjustment value for front tractor 8.5 mm TOF adjustment value for CSF bin 1 8.5 mm TOF adjustment value for CSF bin 2 8.5 mm TOF adjustment value for rear manual insertion 8.5 mm TOF adjustment value for front manual insertion 8.5 mm Bottom margin for rear tractor 11 inch Bottom margin for front tractor 11 inch Font Selection Draft Pitch selection 10cpi Print direction setting Bi-d I/F mode selection Auto Auto I/F waiting time setting 10 sec. Auto line feed Off Auto tear off Off Skip over perforation Off Input buffer On Software ESC/P 0 slash Off Revision B Table 1-39. Cleared Items and Values on EEPROM (Standard Model) (continued) Buzzer Item Value On Auto CR Off Tear-off adjustment value 0 Tear-off wait time 3 sec. TOF minimum value 4.2 mm Paper edge length 0 Paper length for rear manual insertion 22 inch Paper length for front manual insertion 22 inch Sub number for customization Standard Parallel I/F bidirectional mode On Packet mode for Parallel I/F (IEEE1284.4) Auto Packet mode for USB (IEEE1284.4) same as 'IEEE 1284.4 for Parallel I/F' Manual feed wait time 1.5 sec. IBM character table Table2 PRODUCT DESCRIPTIONS Operation 35