Epson 890N Service Manual - Page 87
Front PE (Paper End) Detector, Rear PE Detector, Front PE Detector Removal
UPC - 010343850019
View all Epson 890N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
EPSON FX-890/2190 4.3.10 Front PE (Paper End) Detector 1. Remove the Printer Mechanism. (p.80) 2. Release the 2 clips attaching the front PE detector to the Rear Paper Guide Assembly, and remove the detector. (See Figure 4-24) 3. Disconnect the harness from the detector. Front PE Detector Clips Harness Rear Paper Guide Assembly Revision B 4.3.11 Rear PE Detector 1. Remove the Printer Mechanism. (p.80) 2. Hold the Printer Mechanism horizontally. 3. Release the 2 clips securing Rear PE detector to Rear Paper Guide Assembly. 4. Release the 2 notches on the Rear Paper Guide Assembly securing the detector, and slide the detector toward rear a little. Then remove the detector by pulling it downward. (See Figure 4-25) 5. Disconnect the harness from the detector. Rear PE Detector Harness Figure 4-24. Front PE Detector Removal 2 1 1 Disassembly and Assembly Figure 4-25. Rear PE Detector Removal Printer Mechanism Disassembly 87