Epson 890N Service Manual - Page 83
PF Motor, PF Motor removal
![]() |
UPC - 010343850019
View all Epson 890N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
EPSON FX-890/2190 4.3.6 PF Motor 1. Remove the Printer Mechanism. (p.80) 2. Release the motor harness from the Printer Mechanism. (See Figure 4-19) 3. Locate the release lever (Lever, Release) in the forefront position (Tractor Position). 4. Remove the 2 (CBS (M3x10), CB (M3x8)) screws securing the PF Motor to the FRAME,SUB,RIGHT, and remove the PF Motor. C A U T IO N If the release lever is set to the Friction feeding position, PF Motor is not released. Revision B CBS Screw (3x10) Tightening Torque: 0.9±0.1N.m PF Motor Disassembly and Assembly CB Screw (3x8) Tightening Torque: 0.9±0.1N.m HOLDER, CABLE Figure 4-19. PF Motor removal Printer Mechanism Disassembly 83
![](/manual_guide/products/epson-890n-service-manual-6defdea/83.png)
EPSON FX-890/2190
Revision B
Disassembly and Assembly
Printer Mechanism Disassembly
83
4.3.6
PF Motor
1.
Remove the Printer Mechanism. (p.80)
2.
Release the motor harness from the Printer Mechanism.
(See Figure 4-19)
3.
Locate the release lever (Lever, Release) in the forefront position (Tractor
Position).
4.
Remove the 2 (CBS (M3x10), CB (M3x8)) screws securing the PF Motor to the
FRAME,SUB,RIGHT, and remove the PF Motor.
Figure 4-19.
PF Motor removal
C
A
U
T
I
O
N
If the release lever is set to the Friction feeding position, PF Motor
is not released.
CBS Screw (3x10)
Tightening Torque: 0.9±0.1N.m
CB Screw (3x8)
Tightening Torque: 0.9±0.1N.m
PF Motor
HOLDER, CABLE