Epson 890N Service Manual - Page 31
Indicators ( LEDs ) - fx ribbon
![]() |
UPC - 010343850019
View all Epson 890N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
EPSON FX-890/2190 Revision B 1.3.2.2 Operations at Power-on Holding down the specified switch (switches) while turning on the power to the printer enables the special functions as listed below. Table 1-34. At Power-On Switches Load/Eject NLQ self test Function LF/FF Draft self test Load/Eject & LF/FF Data dump Load/Eject & LF/FF & Pause Clear EEPROM Tear Off/Bin & Load/Eject Clear EEPROM for Driving Line count for ribbon change timing Pause Bi-D adjustment Load/Eject & Pause Panel lock out mode LF/FF & Pause Default setting for panel lock out 1.3.2.3 Operation in Default Setting Mode Table 1-35. Default Setting Mode Switch Function Menu (Pitch & Tear Off/Bin) Enter or exit the default setting mode. Item ↑ (Font), Item ↓ (Pitch) Select the menu. Set (Tear Off/Bin) Changes the setting. The others Not available 1.3.3 Indicators ( LEDs ) This printer has the following indicators to indicate its current condition, as shown in the table below: 1.3.3.1 Indications in Normal Mode LED Printer status Pause Paper out error Release lever error Paper eject error Head hot warning Micro Adjust Tear off Bin selection Font selection Pitch selection Locked switch pressed Fatal error Table 1-36. Normal Mode Pause Paper Out Tear-Off / *1 *2 Bin On _ _ On On _ On _ _ On Blink _ Blink _ _ Blink _ _ _ _ *3 _ _ *3 _ _ _ _ _ _ *6 *6 _ Blink Blink Blink Font 4 _ _ Blink Pitch 5 _ Blink *1. Pause ( Orange ) The "Pause" LED is on when the printer is in the pause status, and off when it is not in the pause status. The "Pause" LED blinks when the Micro Adjust function is enabled or when the printer is in the head hot status. See *6 for LED indication when a locked switch is pressed. PRODUCT DESCRIPTIONS Operation 31
![](/manual_guide/products/epson-890n-service-manual-6defdea/31.png)