Epson 890N Service Manual - Page 76
C524PSB/PSE/PSH Board,
UPC - 010343850019
View all Epson 890N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
EPSON FX-890/2190 4.2.4 C524PSB/PSE/PSH Board 1. Perform Pre-Disassembly. (p.70) 2. Remove the Upper Housing. (p.72) 3. Remove the shield cover. (See Figure 4-8) 4. Disconnect the harness from the connector CN14 on the C524MAIN board. (See Figure 4-11) 5. Disconnect the power cable from the connector CN1 on the C524PSB/PSE/PSH Board. 6. Remove the 2 CBP (M3x12) screws securing the C524PSB/PSE/PSH Board to the Lower Case, and remove the C524PSB/PSE/PSH Board. W A R N IN G Before disassembling, assembling or adjusting the printer, disconnect the power supply cable from the AC power socket. Failure to do so might cause personal injury. Do not touch the heat sink attached to the switching FET (Q1) on the power supply board right after power off as it may be very hot. CN1 C524PSB/PSE/PSH Board Revision B CBP Screws (3x12) x2 Tightening Torque: 0.88±0.1 N.m CN14 Disassembly and Assembly Figure 4-11. C524PSB/PSE/PSH Board Removal Main Components Disassembly 76