Epson 890N Service Manual - Page 32
Tear Off/ Bin LEDs, Font LEDs, Pitch LEDs
![]() |
UPC - 010343850019
View all Epson 890N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
EPSON FX-890/2190 Revision B *2. Paper Out ( Red ) The "Paper Out" LED is on when the printer is in the "paper out" status, and it blinks when the printer has developed a paper eject error, and it is off when the printer is not in such status. See *6 for LED indication when a locked switch is pressed. *3. Tear Off / Bin (Green) Two LEDs display the status of CSF bin selection when cut sheet is used. Both LEDs are off when Bin1 is selected, only the right LED is on when Bin2 is selected, and only the left LED is on when Card mode is selected. Both LEDs blink when continuous paper is in the Tear-off position and both LEDs are off when continuous paper is out of the Tear-off position. Both LEDs are on when the printer is in default setting mode. *5. Pitch ( Green ) Three LEDs display the status of Pitch selection. Figure 1-12. Pitch LEDs *6. LED indication when a locked switch is pressed (Green) With panel lock out mode "On", when a locked switch is pushed, the "Pause" LED and "Paper Out" LED flash simultaneously for three seconds or so. Figure 1-10. Tear Off/ Bin LEDs *4. Font ( Green ) Three LEDs indicate the status of Font & Draft Quality selection. . Figure 1-13. LED indication when a locked switch is pressed NOTE:At this time, buzzer does not sound. Figure 1-11. Font LEDs PRODUCT DESCRIPTIONS Operation 32
![](/manual_guide/products/epson-890n-service-manual-6defdea/32.png)