Epson 890N Service Manual - Page 82

CR Motor Removal 2, Bi-d Adjustment

Get Epson 890N - FX B/W Dot-matrix Printer PDF manuals and user guides
UPC - 010343850019
View all Epson 890N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

EPSON FX-890/2190 4. Remove the 2 SHAFT,MOUNT,CR (M3x12) screws securing the CR Motor assembly to the FRAME,SUB,RIGHT, and remove the CR Motor. (See Figure 4-18) 5. Remove the 2 CB (M3x6) screws securing the CR Motor to the MOUNTING PLATE,MOTOR,CR, and remove the CR Motor. A D JU S TM E N T R E Q U IR E D „ After installing the CR Motor, make the following adjustment: • Bi-d Adjustment (p.101) „ After installing the TIMING BELT,CR, make the following adjustment: • Bi-d Adjustment (p.101) „ Position the CR Motor assembly on the MOUNTING PLATE,MOTOR,CR correctly as shown below; Revision B CR Motor SHAFT,MOUNT,CR Screws (3x10) x2 Tightening Torque: 0.9±0.1N.m MOUNTING PLATE,MOTOR, CR CB Screws (3x6) x2 Tightening Torque: 0.9±0.1N.m MOUNTING PLATE, MOTOR,CR Cable CR Motor „ Lead the FFC and lead wires as shown below: Disassembly and Assembly Figure 4-18. CR Motor Removal 2 Printer Mechanism Disassembly 82

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
EPSON FX-890/2190
Revision B
Disassembly and Assembly
Printer Mechanism Disassembly
82
4.
Remove the 2 SHAFT,MOUNT,CR (M3x12) screws securing the CR Motor
assembly to the FRAME,SUB,RIGHT, and remove the CR Motor.
(See Figure 4-18)
5.
Remove the 2 CB (M3x6) screws securing the CR Motor to the MOUNTING
PLATE,MOTOR,CR, and remove the CR Motor.
Figure 4-18.
CR Motor Removal 2
A
D
J
U
S
T
M
E
N
T
R
E
Q
U
I
R
E
D
After installing the CR Motor, make the following adjustment:
•
Bi-d Adjustment
(p.101)
After installing the TIMING BELT,CR, make the following
adjustment:
•
Bi-d Adjustment
(p.101)
Position the CR Motor assembly on the MOUNTING
PLATE,MOTOR,CR correctly as shown below;
Lead the FFC and lead wires as shown below:
CR Motor
MOUNTING PLATE,
MOTOR,CR
Cable
SHAFT,MOUNT,CR Screws (3x10) x2
Tightening Torque: 0.9±0.1N.m
CB Screws (3x6) x2
Tightening Torque: 0.9±0.1N.m
CR Motor
MOUNTING
PLATE,MOTOR, CR