Epson 890N Service Manual - Page 30
Operation, Control panel, Switches - lf
![]() |
UPC - 010343850019
View all Epson 890N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
EPSON FX-890/2190 1.3 Operation This section describes the operations on this printer. 1.3.1 Control panel The control panel of this printer is equipped with 6 switches and 10 LEDs, which are located as shown below. Figure 1-9. Control Panel Revision B 1.3.2 Switches 1.3.2.1 Operation in Normal Mode In the normal mode, pressing panel switches executes the following functions. Table 1-33. Normal Mode Switch Pause Load/Eject Function • Alternates printing and no-printing status. • Enables Micro Adjust function, holding it down for 3 seconds. • Loads or ejects the paper. • Executes micro feed forward, when this function is enabled. • Executes line feed, pressing it shortly. LF/FF • Executes form feed, holding it down for a few seconds. Tear Off/Bin Font • Executes micro feed backward, when this function is enabled. • Advances continuous paper to the Tear-Off position. • Selects CSF bin 1/2 or Card mode in friction mode. • Selects font and draft quality. Pitch • Selects pitch. Reset (Font & Pitch) • Resets the printer. Menu • Enter or exit the default setting mode. (Pitch & Tear Off/Bin) PRODUCT DESCRIPTIONS Operation 30
![](/manual_guide/products/epson-890n-service-manual-6defdea/30.png)