Epson 890N Service Manual - Page 42
Table 1-40., Setting Values Available for Default Setting Mode
![]() |
UPC - 010343850019
View all Epson 890N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
EPSON FX-890/2190 1.4.1.3 Default setting items Table 1-40. Setting Values Available for Default Setting Mode Item Software Setting / Value ESC/P, IBM PPDS, OKI ML320T *IBM PPDS is the same as IBM 238x plus. Auto tear Off Wait Time 0.5 second, 1 second, 2 seconds, others Bottom margin 4.2 mm, 20 mm, 22 mm, 24 mm, others *When "24 mm" is selected, the printer acts with approx.23.5 mm Line Spacing 6LPI, 8LPI Paper Out Override OFF (No), ON (Yes) Note : Settings with bold weight mean the default setting. 1.4.1.4 Printer defaults FX-880T+ mode has different defaults from current FX-890 mode as follows. Items Software Top margin Bottom margin Auto tear Off Wait Time N Table 1-41. Current FX-890 ESC/P 4.2 mm 4.2 mm 3.0 sec. FX-880T+ (=ML320T) IBM PPDS (*) 22.5 mm 24 mm 0.5 sec. Note "*" : IBM PPDS is same as IBM 238x plus. Revision B 1.4.1.5 Action of the printer Interface FX-880T+ mode does not have Device ID. Only Parallel I/F is possible use. (Can not use USB I/F and Optional Type-B I/F) Tear Off When the Tear Off button is pushed, the printer sends the present printing position in the Tear Off position. If the Auto Tear Off setting is On, the printer always do the Tear Off action when it is not printing. TOF position (MicroAdjust) The setting range of Micro Adjust is 4.2mm to 22mm to 558.8mm(22inch). NOTE: * Don't set up TOF more largely than Page length. PRODUCT DESCRIPTIONS Dimensions and Weight 42
![](/manual_guide/products/epson-890n-service-manual-6defdea/42.png)