Epson 890N Service Manual - Page 36
Bi-D Adjustment
![]() |
UPC - 010343850019
View all Epson 890N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
EPSON FX-890/2190 1.3.7 Bi-D Adjustment Refer to the following flowchart for the Bi-D adjustment. start Turning the printer on while pressing Pause switch. The guide to adjust Bi-d. alignment in this mode is printed and first alignment pattern is printed. [ Step A ] Select most closely alignment number by pressing Item ↓ (Font) and Item ↑ (Pitch) switches. Font LEDs show the pattern number which is selected at that time. The selestion is advanced one by one as the switch is pressed, and the combination of On/Off/Blink of those three LEDs is also changed according to the selection. [ Step B ] Fix the selected number by pressing Set (Tear Off/Bin) switch. Selected number is fixed and next alignment pattern is printed. Repeat Steps A and B until finishing Bi-d. adjustment for NLQ mode. Following adjustment is executed. 1. Bi-d. adjustment for high speed draft mode 2. Bi-d. adjustment for draft mode 3. Bi-d. adjustment for NLQ mode Turn the printer off. The setting is stored into EEPROM. END Figure 1-15. Bi-D Adjustment Flowchart PRODUCT DESCRIPTIONS Operation Revision B 36
![](/manual_guide/products/epson-890n-service-manual-6defdea/36.png)