Epson ActionDesk 4000 User Manual - Page 55
Setting the Jumpers, Processor
View all Epson ActionDesk 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
External cache jumper settings* Cache size J25 64KB 1-2 128KB 2-3 256KB 2-3 J26 1-2 I 1-2 2-3 J27 J28 Off 2-3 1-2 1 1-2 2-3 2-3 l If you have no external cache installed, the position of these jumpers does not matter. Processor type jumper settings Processor type J17 J19 I 486DX/DX2 486SX 1-2.3-4 1-2 I 2-3 Off I Setting the Jumpers If you need to change any jumper settings, follow these steps: 1. Refer to the illustration on page 4-6 to locate the jumpers. 2. If there are any option cards installed in your computer, you need to remove them to access the jumpers. See page 4-18. 3. A jumper's setting is determined by where the jumper is placed on the pins. Use the following table to identify the pin settings for 2-pin, 3-pin, and 4-pin jumpers. To identify pin 1, look at the system board under the jumper. You will see a triangle traced on the board at pin 1. 4-8 Installing and Removing Options