Epson ActionDesk 4000 User Manual - Page 67
Replacing the Option Card Connector Board, Secure the board to the back of the computer with its two
View all Epson ActionDesk 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Replacing the Option Card Connector Board If you removed the option card connector board, follow these steps to replace it. Refer to the option card connector board illustration above. 1. Position the board above its slot and push it straight into the connector, as shown below. 2. Secure the board to the back of the computer with its two retaining screws. 3. Re-install any option cards you removed. See page 4-14. 4-20 Installing and Removing Options
Replacing the Option Card Connector Board
If you removed the option card connector board, follow these
steps to replace it. Refer to the option card connector board
illustration above.
1.
Position the board above its slot and push it straight into the
connector, as shown below.
2.
Secure the board to the back of the computer with its two
retaining screws.
3.
Re-install any option cards you removed. See page 4-14.
4-20
Installing and Removing Options