Epson ActionDesk 4000 User Manual - Page 70

Installing External Cache

Get Epson ActionDesk 4000 PDF manuals and user guides View all Epson ActionDesk 4000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

6. When the chip is properly positioned, push down firmly on both ends of the chip to make sure it is well-seated. 7. Repeat steps 4 through 6 for the other chip. 8. Replace any option cards you removed. See page 4-14 for instructions. 9. Now run SETUP as described in Chapter 2 to enable your system to recognize the increased memory. Installing External Cache You can install 64KB, 128KB, or 256KB of external cache on your system. To install 64KB of external cache, use eight SRAM, 28-pin, 8 x 8, 20ns DIP chips, and one 8 x 8, 20ns tag chip To install 128KB of external cache, use four SRAM, 28-pin, 32 x 8, 20ns DIP chips, and one 8 x 8, 20ns tag chip To install 256KB of external cache, use eight SRAM, 28-pin, 32 x 8, 20ns DIP chips, and one 32 x 8, 20ns tag chip. For the cache memory to work properly, you must install chips in the following configuration (each bank contains four cache memory sockets). Installing and Removing Options 4-23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
6.
When the chip is properly positioned, push down firmly on
both ends of the chip to make sure it is well-seated.
7.
Repeat steps 4 through 6 for the other chip.
8.
Replace any option cards you removed. See page 4-14 for
instructions.
9.
Now run SETUP as described in Chapter 2 to enable your
system to recognize the increased memory.
Installing External Cache
You can install 64KB, 128KB, or 256KB of external cache on
your system.
To install 64KB of external cache, use eight SRAM, 28-pin,
8 x 8, 20ns DIP chips, and one 8 x 8, 20ns tag chip
To install 128KB of external cache, use four SRAM, 28-pin,
32 x 8, 20ns DIP chips, and one 8 x 8, 20ns tag chip
To install 256KB of external cache, use eight SRAM, 28-pin,
32 x 8, 20ns DIP chips, and one 32 x 8, 20ns tag chip.
For the cache memory to work properly, you must install chips
in the following configuration (each bank contains four cache
memory sockets).
Installing
and Removing Options
4-23