Epson ActionDesk 4000 User Manual - Page 59
force it; pull it all the way out and try again., of the SIMM socket. If it does not go in smoothly
View all Epson ActionDesk 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
4. Position the SIMM at an angle over the empty SIMM socket, as shown below. 5. Push the SIMM into the socket until it is seated firmly in the slot. Then tilt it upright, as shown below, guiding the hole at each end of the SIMM over the retaining post at each end of the SIMM socket. If it does not go in smoothly, do not force it; pull it all the way out and try again. 6. Replace any option cards you removed. (See page 4-14 for instructions.) 4-12 Installing and Removing Options
4.
Position the SIMM at an angle over the empty SIMM socket,
as shown below.
5.
Push the SIMM into the socket until it is seated firmly in the
slot. Then tilt it upright, as shown below, guiding the hole
at each end of the SIMM over the retaining post at each end
of the SIMM socket. If it does not go in smoothly, do not
force it; pull it all the way out and try again.
6.
Replace any option cards you removed. (See page 4-14 for
instructions.)
4-12
Installing and Removing Options