Epson C264011 User Manual - Page 143

Your printer icon doesn't appear in the Chooser (Macintosh) Possible cause Solution Your Macintosh has extension conflicts. Disable Quick Draw® GX in the Extensions Manager. Make sure EPSON Monitor3 and SP 1200 are enabled, and then restart your Macintosh. The Chooser contains Delete unused items or move them to the Extensions (Disabled) folder. too many items. Then check for your printer icon in the Chooser again. Your application program can't open your image file (Macintosh) Possible cause Solution Not enough memory is allocated to the application. Highlight the program icon and select Get Info from the File menu, then increase the memory allocated to the application. The "SP 1200 cannot be used" message appears (Macintosh) Possible cause Solutions The printer software has been corrupted. Remove and reinstall the printer software as described in the Printer Basics book. Then, in the Extensions Manager, disable Quick Draw GX, enable EPSON Monitor3 and SP 1200, and restart. Your printer doesn't print correctly as a remote printer (Windows NT) Possible cause Solution You may need to use a different network path and printer port. Select a different printer port in the printer's Properties window and enter the new network path to your printer at the DOS prompt. Then restart your computer. See your Windows NT documentation for instructions on changing the printer port and network path.