Epson C84WN User Setup Information - Page 7
Windows System Requirements - troubleshooting
UPC - 010343849143
View all Epson C84WN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Before you can set up your EPSON Stylus C84WN, you need to decide how you will use it: either with an access point (in infrastructure mode), or without an access point (in ad hoc mode, also called ad hoc 802.11b, computer-to-computer, and peer-to-peer). Windows System Requirements For wireless printing with the EPSON Stylus C84WN, make sure each computer meets the following requirements: s A Microsoft® Windows® compatible PC or laptop with a Pentium®- equivalent processor, 333 MHz or faster recommended s Windows 98, Windows Me, Windows NT® 4.0, Windows 2000, or Windows XP s 64MB of RAM (128MB recommended) s 100MB of free hard disk space (200MB or more recommended) s VGA or better display adapter and monitor (SVGA for Windows XP) s CD-ROM or DVD drive for installing the printer software In addition, each computer needs to be connected to an existing wired network with a wireless access point, or needs to have a wireless card or adapter. s You can use an access point alone or in combination with a hub or router. Note: For a list of supported access points, visit EPSON's support site at: http://support.epson.com. Click Troubleshooting & FAQs in the column on the left, then click Printers > Epson Stylus C84WN > Frequently Asked Questions > Wireless Networking Questions. s Wireless cards can be installed in a PCMCIA slot on a laptop or a PCI slot in a desktop computer. Wireless adapters can be connected through a USB port. If you want to print without an access point, make sure your card or adapter works in ad hoc mode. Note: For a list of supported cards, visit EPSON's support site at: http://support.epson.com. Click Troubleshooting & FAQs in the column on the left, then click Printers > Epson Stylus C84WN > Frequently Asked Questions > Wireless Networking Questions. Windows System Requirements 7