Epson Endeavor User Manual - Page 49
CHANGING THE JUMPER SETTINGS, Change the microprocessor type if you upgrade your
![]() |
View all Epson Endeavor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Changing the Jumper Settings The main system board in your computer has a number of jumpers which control certain functions. These jumpers are preset at the factory to default positions; however, you can alter the following functions by changing the standard settings: 0 Enable or disable the built-in VGA display adapter 0 Set the computer to use a CGA or other type of display adapter 0 Reset the CMOS RAM settings to the factory defaults 0 Enable or disable the PQFP (surface-mounted) microprocessor on some 486SX/25 systems D Change the microprocessor type (if you upgrade your system with a new microprocessor) 0 Change the processor speed. If you need to change any jumper settings, or if you want to check the current settings, follow the instructions in this section. The following tables list the jumper settings and their functions. 2-6 Installing and Removing Options
![](/manual_guide/products/epson-endeavor-user-manual-53df493/49.png)