Epson Endeavor User Manual - Page 94
diskette release button is on the right and the drive light is, on the left.
View all Epson Endeavor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
3. If you are installing a drive in the lower bay, remove the two, retaining screws securing the metal drive bay cover to the front of the computer and remove the cover. Store it in a safe place and save the screws to use later in these steps. 4. If you are installing a 5.25-inch diskette drive, hold it so that the diskette release latch is above the diskette slot. If you are installing a 3.5-inch diskette drive, hold it so that the diskette release button is on the right and the drive light is on the left. If you are installing a hard disk drive, hold it so that the component side faces down, and skip to step 7. Installing and Removing Drives 3 - 2 1
3.
If you are installing a drive in the lower bay, remove the two,
retaining screws securing the metal drive bay cover to the
front of the computer and remove the cover. Store it in a
safe place and save the screws to use later in these steps.
4.
If you are installing a 5.25-inch diskette drive, hold it so that
the diskette release latch is above the diskette slot. If you
are installing a 3.5-inch diskette drive, hold it so that the
diskette release button is on the right and the drive light is
on the left.
If you are installing a hard disk drive, hold it so that the
component side faces down, and skip to step 7.
Installing and Removing Drives
3-21