Epson Endeavor User Manual - Page 65
REPLACING THE OPTION CARD CONNECTOR BOARD, Option Card Connector Board
View all Epson Endeavor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Replacing the Option Card Connector Board If you removed the option card connector board to access any system components, follow these steps to replace it: 1. Position the board above its slot as shown below, and then firmly push it straight in. 2. Secure the board to the power supply with its retaining screw. Now you can re-install any option cards you removed. See page 2-16 for instructions. 2-22 Installing and Removing Options
Replacing the
Option Card Connector Board
If you removed the option card connector board to access any
system components, follow these steps to replace it:
1.
Position the board above its slot as shown below, and then
firmly push it straight in.
2.
Secure the board to the power supply with its retaining screw.
Now you can re-install any option cards you removed. See
page 2-16 for instructions.
2-22
Installing and Removing Options