Epson MX-82 F/T User Manual - Page 21
Gap Adjustment, step. See Fig. 18
View all Epson MX-82 F/T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Fig. 17 Top of Form 7. Gap Adjustment The adjustment of a gap between the head nose and the platen is used to adjust the printing pressure as well as to suit the paper of the different thickness. (1) Move the head adjusting lever (located on the left frame of the Printer) forward or backward to adjust the gap between the head nose and the platen. (See Fig. 18) Forward: To widen the gap. Backward: To narrow the gap. NOTE: With a thick paper, be sure to widen this gap. (2) Adjust the position of the head adjusting lever according to the type of paper to be used. Paper Single-leaf paper Carbon paper sheets Position of adjusting lever Set the lever to the 4th step. Set the lever to the 7th step. (3) Should printed characters become faint due to the use of the printer for an extended period, move the head adjusting lever backward (in theOdirection) by one step. (See Fig. 18) (4) When a set of carbon paper sheets is used, be sure that no characters are printed within the two lines above and below the perforation. -16-