Epson MX-82 F/T User Manual - Page 39
Fig. 44 Setting of Cut Paper Sheet, NOTES, Fig. 45 Printer with Cut Paper Sheet Set Completely, Letter
View all Epson MX-82 F/T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Letter Size Paper t-I+y---..- A4 Size Paper 1. Fig. 44 Setting of Cut Paper Sheet NOTES: 1. The Paper End Detector function may be disabled under software control (ESC 8; refer to page 66 provided printing is left off within 7.5 mm from the paper bottom edge). 2. If the paper is set on the line marked 1/4 as shown in Fig. 44, then the printing starts from a position 28.6 mm below the top edge of the paper. If the paper is set on the line marked 1/8, then the printing starts from a position 30.2 mm below the top edge of the paper. 8. Push the scale back into position and put the printer lid on the Printer. (See Fig. 45) Fig. 45 Printer with Cut Paper Sheet Set Completely -33-
Fig. 44 Setting of Cut Paper Sheet
t-y-
Letter
Size
Paper
I+--..-
A4
Size
Paper
1.
NOTES:
1. The Paper End Detector function may be disabled under
software control (ESC 8; refer to page 66 provided printing is
left off within 7.5 mm from the paper bottom edge).
2. If the paper is set on the line marked 1/4 as shown in Fig. 44,
then the printing starts from a position 28.6 mm below the top
edge of the paper. If the paper is set on the line marked 1/8,
then the printing starts from a position 30.2 mm below the top
edge of the paper.
8. Push the scale back into position and put the printer lid on the Printer. (See
Fig. 45)
Fig. 45 Printer with Cut Paper Sheet Set Completely
-33-