Epson MX-82 F/T User Manual - Page 26
Fig. 21 Assembly Tools, Fig. 22 Removal of Shipping Screws
View all Epson MX-82 F/T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
(2) Removal of protective paper for paper end detector The MX-82 F/T is provided with a protective paper inserted between the inner and outer paper guides to protect the paper end detector from damage due to shocks or vibrations during transportation. Before using the Printer, be sure to remove this paper. If the MX-82 F/T is to be reshipped, remember to return it to the original position. (3) Prepare tools Prepare the following two screwdrivers to disassemble or assemble the printer. (1) Phillips type screwdriver 1 (2) Round-blade type screwdriver 1 I Fig. 21 Assembly Tools (4) Removal of shipping screws The purpose of the shipping screws is to protect the MX-82 F/T against any damage that may be caused by shocks or vibrations during transportation. Therefore, before operating MX-82 F/T, remove the screws as described below. (See Fig. 22) STEP 1. Stand the printer on its left side. 2. Remove with a screwdriver, the two shipping screws visible on the underside of the lower case. Right Side of the Printer J,w* Lower Case Fig. 22 Removal of Shipping Screws NOTE: Save the two shipping screws for possible future use. -20-