Epson PowerLite 81p User Manual - Page 23

Connecting a Composite Video Source, To play sound through the projector, follow the instructions

Get Epson PowerLite 81p PDF manuals and user guides View all Epson PowerLite 81p manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Connecting a Composite Video Source If you're connecting a composite video device, use a commercially-available RCA A/V cable. Before starting, make sure the projector and your DVD player or other video source are turned off. 1. Connect the yellow RCA plug on one end of the cable to the projector's yellow Video jack as shown below. 2. Connect the yellow plug on the other end of the cable to the video-out port on your video source. 3. To play sound through the projector, follow the instructions beginning on page 27. If you don't need to make any other connections, you can plug in your projector and turn it on. See page 30 for instructions. If more than one device is connected to the projector, select Video as the input source after projection starts. See page 32 for details. Setting Up the Projector 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
Setting Up the Projector
23
Connecting a Composite Video Source
If you’re connecting a composite video device, use a
commercially-available RCA A/V cable. Before starting, make sure the
projector and your DVD player or other video source are turned off.
1.
Connect the yellow RCA plug on one end of the cable to the
projector’s yellow
Video
jack as shown below.
2.
Connect the yellow plug on the other end of the cable to the
video-out port on your video source.
3.
To play sound through the projector, follow the instructions
beginning on page 27.
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 30 for instructions.
If more than one device is connected to the projector, select
Video
as
the input source after projection starts. See page 32 for details.