Epson PowerLite 81p User Manual - Page 82

Power light Red Red Red - Red Flashing red Orange Flashing green Green Flashing orange Lamp light Flashing red Temperature light Flashing red Off Flashing red Flashing red Off Flashing orange Off Off Red Off Flashing orange Off Off Off Off Off Off Off Off Description There is an internal error in the projector. Turn the projector off and unplug it. Contact Epson for help. There is a problem with the fan or a sensor. Turn the projector off and unplug it. Contact Epson for help. The lamp is burned out, broken, or not installed correctly; or the lamp cover is open. Close the cover or replace or reseat the lamp, if necessary, as described on page 73. If these suggestions don't work, contact Epson. Replace the lamp with a new one as soon as possible; see page 73 for instructions. If you continue to use the lamp, there is a risk it may break. The projector has overheated and turned itself off. Let it cool for about five minutes, then turn it back on. Make sure there is plenty of space around and under the projector for ventilation. Also clean the air filter and air exhaust vents. See page 71. If it continues to overheat, you may need to replace the air filter. The projector is too hot. Make sure the temperature surrounding the projector does not exceed 95 °F (35 °C) and there is plenty of space around and under the projector for ventilation. Clean the air filter and air vents, if necessary. See page 71 for instructions. The projector is in standby or sleep mode. You can unplug it or press the P Power button to turn it on. The projector is warming up. Wait for the image to appear. The projector is operating normally. The projector is cooling down. Wait for the light to stop flashing and remain orange before unplugging it. 82 Solving Problems