Epson PowerLite 81p User Manual - Page 24

Connecting an S-video Source

Get Epson PowerLite 81p PDF manuals and user guides View all Epson PowerLite 81p manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Connecting an S-video Source If your video source has an S-video jack, you can use it to project a higher quality video image. You'll need an S-video cable (ELPSV01), which is usually provided with your video source, or you can purchase one from Epson. See page 12 for ordering information. Before starting, make sure the projector and your DVD player or other video source are turned off. 1. Insert one end of the S-video cable into the projector's S-Video port and the other end into the S-video output port of your video source. 2. To play sound through the projector, follow the instructions beginning on page 27. If you don't need to make any other connections, you can plug in your projector and turn it on. See page 30 for instructions. If more than one device is connected to the projector, select S-Video as the input source after projection starts. See page 32 for details. 24 Setting Up the Projector

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
24
Setting Up the Projector
Connecting an S-video Source
If your video source has an S-video jack, you can use it to project a
higher quality video image. You’ll need an S-video cable (ELPSV01),
which is usually provided with your video source, or you can purchase
one from Epson. See page 12 for ordering information.
Before starting, make sure the projector and your DVD player or
other video source are turned off.
1.
Insert one end of the S-video cable into the projector’s
S-Video
port and the other end into the S-video output port of your video
source.
2.
To play sound through the projector, follow the instructions
beginning on page 27.
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 30 for instructions.
If more than one device is connected to the projector, select
S-Video
as the input source after projection starts. See page 32 for details.