Epson Stylus 800 User Manual - Page 53

Troubleshooting, Power Supply, Power

Get Epson Stylus 800 - Ink Jet Printer PDF manuals and user guides View all Epson Stylus 800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Note: Do not remove the ink cartridge when transporting. 2. Unplug the power cord from the electrical outlet; then disconnect the interface cable from the printer. 3. Remove the paper from the paper feeder. 4. Attach the protective material to the printer. 5. Repack the printer and power cord and place them in the original box. 6. Keep the printer flat in the box during transport. 7. If the print quality is poor after transport, clean the print head. See "Cleaning the Print Head." Troubleshooting Most problems you may encounter while operating your printer have simple solutions. Find your problem in this section and follow the recommended steps. If you cannot solve your problem, contact your dealer or a qualified service person for assistance. Power supply The printer does not work or control panel lights are off. Check that the power cord is properly plugged into the electrical outlet. Check that the side of the power switch with the vertical bar (I) is pressed down to turn on the printer. If the electrical outlet is controlled by an outside switch or automatic timer, use a different outlet. Maintenance and Troubleshooting 3-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
Note:
Do
not
remove
the ink cartridge when transporting.
2.
Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the printer.
3.
4.
5.
Remove the paper from the paper feeder.
Attach the protective material to the printer.
Repack the printer and power cord and place them in the
original box.
6.
Keep the printer flat in the box during transport.
7.
If the print quality is poor after transport, clean the print
head. See Cleaning the Print Head.
Troubleshooting
Most problems you may encounter while operating your
printer have simple solutions. Find your problem in this section
and follow the recommended steps. If you cannot solve your
problem, contact your dealer or a qualified service person for
assistance.
Power
supp
l
y
The printer does not work or control panel lights are off.
Check that the power cord is properly plugged into the
electrical outlet.
Check that the side of the power switch with the vertical bar (I)
is pressed down to turn on the printer.
If the electrical outlet is controlled by an outside switch or
automatic timer, use a different outlet.
Maintenance and Troubleshooting
3-5