Epson Stylus 800 User Manual - Page 71
Initialization, Appendix - download
View all Epson Stylus 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Initialization The printer can be initialized (returned to a fixed set of conditions) in three ways: Hardware initialization Software initialization Control panel initialization l The power is turned on. l The printer receives an INIT signal from the parallel interface (pin 31 goes LOW). The following condition then results: 1) The printer mechanism is initialized. 2) The input data buffer is cleared. 3) The download character set is cleared. 4) The print buffer is cleared. 5) The default values are set. l Software sends the ESC Q (initialize the printer) command. The following condition then results: 1) The print buffer is cleared. 2) The default values are set. (The last panel settings are maintained.) l Hold down the ALT button and press the LOAD/EJECT button. The following results: 1) The input data buffer is cleared. 2) The print buffer is cleared. 3) The default values are set. (The last panel settings are kept.) Appendix A-11