Foxconn P35AP-S English manual. - Page 21
Expansion Slots
View all Foxconn P35AP-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 2 Installation Instructions Expansion Slots This motherboard includes three 32-bit master PCI slots,two PCI Express x1 slots and two PCI Express x16 slots. For the detailed PCI Express cards support list on this motherboard, please visit the website: http://www.foxconnchannel.com PCI Slot The expansion cards can be installed in the three PCI slots. PCI slots support cards such as a LAN card, USB card, SCSI card and other cards that comply with PCI specifications. PCI Express x1 Slot This motherboard has two PCI Express x1 slots designed to accommodate less bandwidth-intensive cards, such as a modem or LAN card.The PCI Express x1 slot offering 250MB/s(500MB/s concurrent) of bandwidth. PCI Express x16 Slot This motherboard has two PCI Express x16 slots that reserved for graphics or video cards. The PCI Express x16 slots offering 4GB/s (8GB/s concurrent) of bandwidth. Installing an expansion card 1. Before installing the expansion card, read carefully the documentation that came with it and make the necessary hardware settings for the card. 2. Make sure to unplug the power cord before adding or removing any expan- sion cards,Remove the bracket opposite the slot that you intend to use. 3. Align the card connector with the slot and press firmly until the card is completely seated in the slot. 4. Secure the card to the chassis with the screw you removed earlier. Warning: If a performance graphics card was installed into x16 PCI Express slot,24 pin power supply was recommended. 15