Foxconn P35AP-S English manual. - Page 42
CPU Clock vs Memory Speed
View all Foxconn P35AP-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Chapter 3 BIOS Description NB Voltage Setting This item is used to set NB Voltage. The default voltage is 1.250V. Pay attation to the W arning message in the "Item Help" table. CPU VTT Voltage Setting This item is used to set CPU VTT Voltage. The default voltage is 1.200V. Pay attation to the W arning message in the "Item Help" table. SB Voltage Setting This item is used to set SB Voltage. The default voltage is 1.500V. Pay attation to the W arning message in the "Item Help" table. 8.4 Over Clock Phase Select Use this item to select the over clock phase. Setting values: [O.C. Disabled]; [Manual O.C.]; [Instant O.C.]. 8.5 Instant OverClocking This item is used for instant OverClocking , you may choose over clock instantly by 5%, 10%,15%.....etc. 8.6 ***Ratio and Clock Setting*** CPU Clock Ratio Unlock This item is used to enable or disable the CPU Clock Ratio Unlock. CPU Clock Ratio This item is used to set the ratio of an unlocked CPU. Using different CPU, the setting values are different. CPU Clock This item allows you to adjust the CPU FSB clock. CPU Clock vs Memory Speed This item allows you to set the rate of CPU Clock vs Memory Speed. System Memory Speed This item shows the System Memory Speed. PCI Express Clock This item allows you to adjust the PCI Express bus clock. PCI Clock This item allows you to adjust the PCI bus clock. Configuration options: [Synchronous] (Synchronous with PCI Express bus clock); [33.6 MHz]; [37.3 MHz]; [42.0 MHz]. 36