Foxconn P35AP-S English manual. - Page 27
BIOS ID, 8 Base/Extended/Total Memory, 4 Drive A, 5 Video Setting, 6 Halt
View all Foxconn P35AP-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Chapter 3 BIOS Description 1.4 Drive A This option allows you to select the kind of FDD to be installed, including "None", [360K, 5.25 in], [1.2M, 5.25 in], [720K, 3.5 in], [1.44M, 3.5 in] and [2.88 M, 3.5 in]. 1.5 Video Setting The following table is provided for your reference in setting the display mode for your system. EGA/VGA CGA 40 Enhanced Graphics Adapter / Video Graphic Array. For EGA, VGA, SEGA, SVGA, or PGA monitor adapters. Color Graphic Adapter, powering up in 40 column mode. CGA 80 Color Graphic Adapter, powering up in 80 column mode. MONO Monochrome adapter, including high resolution monochrome adapters. 1.6 Halt On This category determines whether or not the computer will stop if an error is detected during powering up. All Errors No Errors All, But Keyboard All, But Diskette All, But Disk/Key Whenever the BIOS detects a nonfatal error, the system will stop and you will be prompted. The system boot will not stop for any errors that may be detected. The system boot will not stop for a keyboard error; but it will stop for all other errors. The system boot will not stop for a diskette error; but it will stop for all other errors. The system boot will not stop for a keyboard or disk error, but it will stop for all other errors. 1.7 BIOS ID This item shows the information of the BIOS ID. 1.8 Base/Extended/Total Memory These are Displays-Only information of the system memory, detemined by POST(Power On Self Test) of the BIOS. 21