Foxconn P35AP-S English manual. - Page 37
PnP/PCI Configurations
View all Foxconn P35AP-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
6. PnP/PCI Configurations Chapter 3 BIOS Description PnP/PCI Configurations Menu 6.1 Init Display First This item is used to set which display device will be used first when your PC starts up.Setting values:[PCI Slot]; [PCIEx]. 6.2 Resources Controlled By This item is used to define the system resource control scheme. If all cards you use support PnP, then select [Auto] and the BIOS will automatically distribute interruption resources. If the ISA cards you installed not supporting PnP, you will need to select [Manual] and manually adjust interruption resources in the event of hardware conflicts. However, since this motherboard has no ISA slot ,this option does not apply. 6.3 IRQ Resources Press the key, then manually set IRQ resources. 6.4 PCI/VGA Palette Snoop If you use a non-standard VGA card, use this option to solve graphic acceleration card or MPEG audio card problems (e.g., colors not accurately displayed). 6.5 INT Pin 1/2/3/4/5/6/7/8 Assignment Use this item to assignment IRQ resources for INT Pin 1/2/3/4/5/6/7/8. 6.6 PCI Express relative items Maximum Payload Size This item is used to set maximum TLP payload size for PCI Express devices. The unit is byte. 31